English
  1. Home
  2. Products
  3. Softwares
  4. RSS-2-300 S Security Radar Software

Overview

Geolux RSS-2-300 S is a Doppler radar detector operating in K-band. Designed for long range intrusion detection applications, RSS-2-300 S radar sensor reports a list of all currently detected moving objects distanced up to 800m. Refresh rate can be set up to 20 times per second. Detected objects are reported over serial or CAN interface. RSS-2-300 S sensor supports ASCII-S and GLX-NMEA serial interface data protocols, and support for more protocols can be added on customer request. Two configurable open-collector alarm outputs are also available for indication of the intrusion detection.
Field-proven Geolux RSS-2-300 S radar sensor is certified according to both European and American standards, which makes it an ideal solution for our partners that operate globally.
Advanced signal processing algorithms analyze detected objects in real time, and extract precise target statistics, greatly reducing false alarms and enabling RSS-2-300S to detect objects even through bushes and other similar obstacles.

Radar Configurator Software

Geolux RSS-2-300 Sradar sensor has integrated web-based utility for configuring radar operation and monitoring detected targets. To use the web-based configuration utility, simply connect the radar to the Ethernet network, and type its IP address to your web browser. The default IP address for Geolux RSS-2-300 S radar is 192.168.1.120. Take care that, when conecting the radar to the Ethernet for the first time, your local Ethernet network must be in the same subnet (addresses starting with 192.168.1.x).

Using a web-based user interface provides maximum flexibility, since the users can connect to the radar and configure it from any platform (Windows, Linux, Mac, Android, iOS). Preferred web browsers are Chrome and Safari.

  • Product Highlights
  • Features
  • Applications
  • Specifications
  • Media
  • Operates in K-band (24.125 GHz or 24.200 GHz)
  • Detection range: 800 m for vehicles, 400 m for humans, 24° beam angle
  • Low power consumption (max 1,35 W, typically 1 W)
  • 9 to 27 VDC input voltage range
  • Operating temperature range from -40 °C to +85 °C (-40 °F to +185 °F)
  • IP66 aluminum casing
  • RS-232, RS-485 and CAN communication interface support
  • ASCII-S and GLX-NMEA protocols support; more protocols can be supported on customer request
  • 2 x open collector, fully configurable alarm outputs
  •  

COVER LARGE AREA WITH ONE SENSOR

The area covered by RSS-2-300 S is much larger than the area covered by PIR sensors.

SOLAR POWER SUPPLY READY

Low power consumption enables the use of solar power supply for installation on remote locations.

LAW ENFORCEMENT

The radar measurement precision makes RSS-2-300 T ready for all law-enforcement applications.

Perimeter Security

Geolux RSS-2-300 S radar sensor can detect human and vehicle movement up to 400 meters, and 800 meters respectively. The radar sensor is similar to microwave barriers (it detects existence of moving objects), but unlike microwave barriers which can monitor only a thin line, the radar monitors all movement within a pie-shaped area.

Poaching Control

Since the RSS-2-300 S radar reports not only the presence of movement within covered area, but also the relative speed of all detected objects, it can be used to detect vehicle movement (faster) inside a wildlife reserve where animals move slower. When vehicle movement is detected, reserve guards can be automatically notified to prevent poaching.

GENERAL

Radar Type K-band 24.125GHz/24.200GHz 27 dBm EIRP
Beam Angle 24° Azimuth ，12° Elevation
Detection Distance 800 m vehicles，400 m humans
Speed Range 2 km/h to 336 km/h
IP Rating IP66

ELECTRICAL & MECHANICAL

Power Input 9 to 27 VDC
Power Consumption < 1.35W (typical 1W)
Maximal Current < 250 mA
Temperature Range -40°C to +85°C
(without heating or coolers)
Device Outer Dimensions 127mm x 121mm x 188mm

INTERFACE

Serial Interface 1 x serial RS-485 half-duplex
1 x serial RS-232 (two wire interface)
Baud Rate 1200 bps to 115200 bps
Serial Protocols ASCII-S, GLX-NMEA,other available on request
CAN Interface Up to 1Mbps CAN2.0
Alarm Outputs 2 x open collector, max 50V 200mA
Expansion Port 1 x general purpose 16-pin for custom expansion modules
 

CERTIFICATES

EN 50293:2000
EN 61000-6-2, EN 61000-6-4:2007
EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-3-3:2008
EN 300 440-1, EN 300 440-2
FCC Part 15 Subpart C

Copyright © 2016 Eagle Technologies Ltd All Rights Reserved

Enquiry:+86-158-29636985

Flow HydroSpan

on WeChat

Desgin：鹰格电子